B&G Deckman - Manual (Page 125)

Chapter 8: Wind calibration
8.2
as… from the menu button. To view a saved calibration table (i.e.
without Deckman applying the values to the wind data), select polars,
followed by adjust wind speed (or angle), then show, then either click
on a recently used table or hit file… and browse to the correct file.
Note. Separate wind calibration tables used when the Start display is in
use. See the ‘Start display’ chapter for more information.
To load a saved file, click polars, followed by adjust wind speed (or
angle), then load, then either click on a recently used table or hit file…
and browse to the correct file.
Figure 8.1