B&G Deckman - Manual (Page 70)

Set windward/leeward
4.5
Set windward/leeward
The windward/leeward option brings up the following dialog:
This allows you to set up
a windward / leeward
course and start line (see
Figure 4.3). The three
boxes allow you to set the
bearing of the windward
mark from the leeward
mark, the distance from
the start to the leeward
mark and the distance
from the leeward mark to
the windward mark. At
the bottom of the box you
must choose where on the
start line the bearing is
taken from.
Figure 4.3
Figure 4.4