ClearOne DigiLinX - Manual (Page 97)

DigiLinX Install and Design Guide
13-2
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 13-1 TheaterLinX front panel
Connectors
Figure 13-2 shows the connectors on the back panel of TheaterLinX
Figure 13-2 TheaterLinX back panel
The following are the major functional areas of the back panel.
Analog and S/PDIF
Stereo audio output connections go to the receiver.
Analog
Input and output of the stereo analog audio with pass-through connections on the
inputs.
Ethernet
10/100 Ethernet connection that goes to the SwitchLinX.
A/V Receiver
This section includes a power sense connection like those used on an MLA101 (used to
determine if a device is powered), a pass-through for the power sense, an IR output
used to control the Receiver, and an RS-232 connection used to control the A/V
receiver.
Analog In
(Right and
Analog Pass
Through
Left)
(Right and
Left)
S/PDIF
Pass Through
In
S/PDIF
In and Out
Ethernet
A/V
Receiver A/V
Receiver
RS-232
A/V
Receiver
Sense and
IR
Display
Pass-Through,
Sense, and
IR
Sources
IR
1,2,3,4
NetStreams
IR
Receiver
IR
Block
,
Output
Contact
Closures
Input
Sensor
Power
Through
Pass-
Analog
Out