ClearOne DigiLinX - Manual (Page 19)

DigiLinX Installation and Design Guide
2-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
SwitchLinX
™
SW324/SW208/SW1024/SW1124/SW1148
SwitchLinX is a family of IGMP (Internet Group Management Protocol) enabled,
multicasting, non-blocking 10/100Mbps Fast Ethernet and 10/100/1000 Gigabit
Ethernet switches. SwitchLinX is designed specifically for handling the high demands
of networked audio and video distribution products. Additional SwitchLinX can be
employed to expand the number of network connections.
There are four sizes of SwitchLinX depending on what is required for your project
(Figure 2-8):
 SW208 - 8 10/100 Mbps ports
 SW324 - 24 10/100 Mbps ports
 SW1024 - 24 10/100/1000 Mbps ports
NOTE: The SW1024 is limited to 64 multicast IP addresses. If you need more multicast IP
addresses, you will need to add an additional device.
 SW1124 - 24 10/100/1000 Mbps ports
 SW1148 - 48 10/100/1000 Mbps ports
Figure 2-8 SwitchLinX SW324/SW208/SW1024
IRLinX
™
IRL1
IRLinX (Figure 2-9) allows DigiLinX to receive IR commands in zones that do not
have an IR receiver. It provides installers with the flexibility to locate the IR receiver in
a convenient location to meet the homeowner’s needs. IRLinX processes DigiLinX
native IR commands such as volume up, volume down, and mute, from an IR remote.
SW1024
SW208
SW324
SW208