ClearOne DigiLinX User Manual
Page 101
DigiLinX Install and Design Guide
13-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 13-4
Connecting the Appropriate Control Cable
5.
TheaterLinX can control the sources attached to the receiver using the included IR
emitters or a third party IR system. To use the NetStreams IR emitters, connect the
IR emitter side over the IR receiver on the source and plug the other end into an
available IR source port on the TheaterLinX.
Also included is an IR reciever that can be used to control DigiLinX from an IR
This manual is related to the following products: