ClearOne DigiLinX User Manual
Page 62
KeyLinX
7-5
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
4.
Connect the Audio Port or MU290 to the EIM splitter jack labeled Audio.
5.
Connect the IRLinX to the KeyLinX connector labeled IRLinX.
6.
Run a CAT5 cable from the KeyLinX port on the EIM splitter to the KeyLinX.
7.
From the Audio port located on the EIM splitter, run a CAT5 cable to the Audio
Port (or to the MU290 and then to the Audio Port if you are using an MU290).
This manual is related to the following products: