ClearOne DigiLinX - Manual (Page 17)

DigiLinX Installation and Design Guide
2-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
ViewLinX
™
VL100/ VL9100-CS
ViewLinX is an IP Video component that provides for real time decoding of a TCP/IP
uncompressed A/V stream from the DigiLinX gigabit network into an analog or
S/PDIF audio signal and a component, composite S-Video or VGA video signal for
output to a display. Designed for installation at or near the location of the video
display, ViewLinX also encode audio from a TV monitor output for listening on
networked speakers in a room. The VL9100-CS is designed for the commercial
market and features BNC connectors, and balanced audio outputs. Additionally, the
VL9100-CS features support for the NetStreams Multimedia wall plate that allows the
integrator to extend the ouput 150 feet or 50 meters from the ViewLinX. The
Multimedia wall plate also supports the same output from both the ViewLinX and wall
plate simultaneously.
Figure 2-4 ViewLinX VL100
Streaming Music Manager SMM100
The Streaming Music Manager SMM100 is a hardware device designed to search a
computer network for MP3 and WAV music files and playlists. It builds a database and
makes them available to the DigiLinX network. DigiLinX users can then browse the
database, locate files, and view metadata such as cover art. See Figure 2-5.
Figure 2-5 Streaming Music Manager SMM100
ControLinX
™
CL100/ CL9100-CS
The ControLinX CL100 (shown in Figure 2-6) allows you to easily integrate and
control supported brands of lighting, automated heating, cooling, security and other
third party systems with your DigiLinX system. The ControLinX CL100 enables
control of non-IP-Based sources from DigiLinX using RS-232, IR, or voltage sensing.
The CL100 features a two-pin Phoenix connector for power and an Ethernet connector
to connect to your DigiLinX network. Each third party system requires one CL100.
Multiple CL100s can be connected to a SwitchLinX. The CL9100-CS is specifically
designed for the commercial market and features the same foot print (1U high, 1/2 rack
wide) as the other commercial products.
SMM100