ClearOne DigiLinX - Manual (Page 112)

16-1
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Chapter
16
System Programming and Design
System Programming
DigiLinX Dealer Setup is a PC-based program that allows you to configure DigiLinX
devices so that they can communicate across a DigiLinX network. Phases of the
software setup include:
 creating a project
 matching the physical hardware devices to the hardware setup in the project
 configuring devices with system-specific information
 saving the project
 sending the configuration files to the server
 learning IR commands.
The DigiLinX Dealer Setup Program requires Windows XP Service Pack 2 (SP2).
You can download the DigiLinX Dealer Setup Program and manual from the Dealer
Documents page on the NetStreams website at
www.netstreams.com .
System Design
Because DigiLinX is scalable, system design and configuration possibilities are
endless. There are some diagrams included in this section to get you started.
Remember to use the NetPower calculator to figure out how many PowerLinX power
supplies your system requires.