Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 7)

Chapter 1 Product Support and Maintenance
This section provides general Banner resources and specific documentation for installers and operators of this
Presence
PLUS Vision Sensor.
Attention: Not to be Used for Personal Protection.
Never use these products as sensing devices for personel protection. Doing so could lead to serious injury or
death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI, and IEC standards
for personnel protection.
1.1 Warnings and Cautions
1.1.1 Safety Warnings
To avoid personal injury:
• Never use PresencePLUS Pro as a sensing device for personnel protection. Such use could create an unsafe condition
that could lead to serious bodily injury or death.
• Before connecting or disconnecting any cables, be sure the power supply is OFF.
• Never connect PresencePLUS Pro to a power source other than 10-30V dc.
• Keep components at least 250 mm (10") away from power cables.
• Keep components away from high-voltage power sources and motors.
1.1.2 Electrostatic Discharge Caution
Avoid the damage that electrostatic discharge (ESD) can cause to the camera or controller.
Always use a proven method for preventing electrostatic discharge when installing a lens or attaching a cable.
1.1.3 User Service Caution
7 Minneapolis, MN USA Banner Engineering Corp.