Banner PresencePLUS Pro COLOR—PROII Camera User Manual
Page 354
Product Select #0
Product Select #1
Product Select #2
Product Select #3
Inspection Number
OFF
ON
OFF
ON
10
ON
ON
OFF
ON
11
OFF
OFF
ON
ON
12
ON
OFF
ON
ON
13
OFF
ON
ON
ON
14
ON
ON
ON
ON
15
* The only way to save an inspection to RamDisk (Inspection Number 0) is to use the Downloadable Inspection API.
Inspections stored in RamDisk are temporary; that is, if the sensor is restarted, or a product change occurs, the inspection
in RamDisk will be lost. If you try to access an inspection in RamDisk and there isn't one available, you will get an
system error 1000 (plus the Inspection Number attempted). For more information about the Downloadable Inspection
API, see the Inspection Download Users Guide.
Generalizing this BCD-type table; that is, writing an integer in binary and encoding the binary value into the correct
Product Select Inputs:
• the least significant bit is assigned to Product Select #0, or pin 19.
• the most significant bit is assigned to Product Select #3, or pin 16.
This will allow you to go to inspections 0-15. To get to higher inspection numbers, you have to start using up configurable
I/O (one of the options that you can select for the configurable I/O is Product Select).
Use the following guidelines to determine how many of the configurable I/O you will need to get to higher inspection
numbers:
• Using all four dedicated Product Select lines accomodates 2
4
inspections (16).
• By adding 2 of the configurable I/O, you will have a BCD table that has 2
6
entires (64 inspections).
• By adding all 6 of the configurable I/O as Product Select lines, you can access the full range of possible inspections
(technically 2
10
= 1024, but the real total is capped at an administrative limit of 999.)
The table below shows adding I/O #5 and I/O #6.
Product Select
#0
Product
Select #1
Product
Select #2
Product
Select #3
I/O #5 - Product
Select # 4
I/O #6 - Product
Select # 5
Inspection
Number
OFF
OFF
OFF
OFF
ON
OFF
16
ON
OFF
OFF
OFF
ON
OFF
17
OFF
ON
OFF
OFF
ON
OFF
18
ON
ON
OFF
OFF
ON
OFF
19
OFF
OFF
ON
OFF
ON
OFF
20
ON
OFF
ON
OFF
ON
OFF
21
OFF
ON
ON
OFF
ON
OFF
22
ON
ON
ON
OFF
ON
OFF
23
OFF
OFF
OFF
ON
ON
OFF
24
ON
OFF
OFF
ON
ON
OFF
25
OFF
ON
OFF
ON
ON
OFF
26
ON
ON
OFF
ON
ON
OFF
27
OFF
OFF
ON
ON
ON
OFF
28
ON
OFF
ON
ON
ON
OFF
29
Banner Engineering Corp.
Minneapolis, MN USA
354
2/2010
Product Change