Banner PresencePLUS Pro COLOR—PROII Camera - Manual (Page 361)

Chapter 14 Backing Up and Restoring Vision Sensor
Data
13.1 Backing up Vision Sensor Data
To back up Vision sensor data:
1. Insert the PresencePLUS installation CD into the CD-ROM drive, and launch the install program.
2. Click on PresencePLUS Update Firmware.
3. From the list of sensors in the PresencePLUS Firmware Updater, select the sensor you want to back up, and click
Connect
.
4. Click on the Sensor Backup tab.
361 Minneapolis, MN USA Banner Engineering Corp.