Rockwell Automation 2098 CompactLogix Indexing Motion Accelerator Toolkit Quick Start - Manual (Page 53)

Publication IASIMP-QS011B-EN-P — January 2009 53
Motion Logix Integration Chapter 5
The RSLogix 5000 software launches and
your application file opens.
Configure Your Logix System
Follow these steps to configure your Logix system to your needs.
Select Your CompactLogix Controller
1. Choose Edit>Controller Properties.
The Controller Properties window opens.
2. Select the General tab.
3. Verify that the controller Type matches your system.
If not, perform the following steps.
a. Click Change Controller to select the controller
type to match your actual hardware.
b. Click OK.
4. Modify the controller Name as appropriate.
5. Click OK.