Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 80)

FactoryTalk EnergyMetrix Software
80
Sharing a Meter Between Groups and Domains
You can assign a meter to multiple groups, move a meter from one group to another, or
apportion a meter among different groups or domains. Follow these steps to share a meter
between groups and domains.
1. Navigate to one of the groups or domains that will share the meter.
2. In the Group Setup screen, click Edit.
3. Select the meter to share.
If the meter is not assigned to the group or domain, select it in the Meters Not
Assigned to Group window and click the right arrow to assign it.
4. With the meter selected, enter a Contribution Factor between 0 and 100%.
The default meter contribution factor is 100%.
5. Click Save adjacent to the contribution factor field.
6. When you are finished setting meter contributions, click the Save button for the group
setup (at the top of the page) to store all the changes.
FactoryTalk EnergyMetrix software does not check that the contribution factors for
a meter total 100%.