Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 161)

7 • RT (Real Time)
161
This shows the phase rotation of the voltage. If the power monitor is measuring a
single-phase system, this field will display ‘No Rotation’.
 Voltage and Current Sequence Components
This shows the results of symmetrical component analysis and the voltage and current
unbalance values.
Power Tab
This displays real-time data from an Allen-Bradley 1426 PowerMonitor 5000 unit.
 Power Data
This displays the power information produced by the power monitor:
 Real power per phase and average
 Reactive power per phase and average
 Apparent power per phase and average
 Power Factor Data
This shows the power factor information produced by the power monitor:
 True power factor per phase and average
 Displacement power factor per phase and average
Per-phase power values display as zero in Delta metering modes.
Energy/Demand Tab
This displays real-time data from an Allen-Bradley PowerMonitor 5000 unit.
 Energy Data
This displays all of the energy information produced by the power monitor, including
the following:
 Forward, reverse, and net real energy
 Forward, reverse, and net reactive energy
 Apparent energy
 Amp hours
 Elapsed Time
The amount of time (in minutes) that has elapsed within the current demand period.
 Current Demand
The calculated demand for average current.
 Power Demand
The calculated demand for total real power.
 Reactive Power Demand
The calculated demand for total reactive power.
 Apparent Power Demand