Rockwell Automation MPMA Integrated Multi-Axis Linear Stages - Manual (Page 13)

Rockwell Automation Publication MPMA-UM001B-EN-P - November 2010 13
Multi-axis Stage Safety Chapter 1
International Air Transport Association (IATA) Dangerous Goods Regulations.
An IATA trained individual must be involved when shipping this product via
domestic or international air freight. Packing Instruction 902 provides
information regarding the preparation of this product for air transportation.
Follow these regulations for general marking and labeling requirements, the
application of specific Magnetized Material Handling Labels, and instructions for
preparing the Shipper's Declaration for Dangerous Goods.
As a minimum, refer to the following IATA Dangerous Goods Regulations:
• Subsection 1.5: Training
• Subsection 3.9.2.2: Classification as Magnetized Material
• Subsection 4.2: Identification as UN 2807, Magnetized Material, Class 9,
Packing Instruction 902
• Subsection 7.1.5: Marking
• Subsection 7.2: Labeling
• Subsection 7.4.1: Magnetized Material Label
• Section 8: Shipper's Declaration for Dangerous Goods
When shipped via ground in the United States, these products are not considered
a U.S. D.O.T. Hazardous Material and standard shipping procedures apply.
Standards
Standards and requirements applicable to this product include, but are not
limited to, the following:
• ANSI/RIA R15.06, Industrial Robots and Robot Systems Safety
Requirements - Teaching Multiple Robots
• ANSI/NFPA 79, Electrical Standard for Industrial Machinery
• CSA/CAN Z434, Industrial Robots and Robot Systems- General Safety
Requirements
• EN60204-1, Safety of Machinery. Electrical Equipment of Machines
• UL 1740, UL Standard for Safety Industrial Robots and Robotic Equipment
Motor Model Identification
The nameplate on ball screw driven linear stages lists the specific MP-Series servo
motor model used.