Rockwell Automation 1797-OE8H FLEX Ex HART Analog Modules User Manual - Manual (Page 171)

Publication 1797-6.5.3 - March 2006
Configure the 1797-OE8H Module in RSLogix 5000 Software Over the ControlNet Network D-7
Output Refer to the following tables for output information.
Digital Output Data
Global Reset Bit
The global reset bit goes in bit [Adapter Name]:[Slot]:O.Data[0].14.
Analog Output Data
Channel Bits
0 [Adapter Name]:[Slot]:O.Data[0].0
1 [Adapter Name]:[Slot]:O.Data[0].1
2 [Adapter Name]:[Slot]:O.Data[0].2
3 [Adapter Name]:[Slot]:O.Data[0].3
4 [Adapter Name]:[Slot]:O.Data[0].4
5 [Adapter Name]:[Slot]:O.Data[0].5
6 [Adapter Name]:[Slot]:O.Data[0].6
7 [Adapter Name]:[Slot]:O.Data[0].7
Channel Words
0 [Adapter Name]:[Slot]:O.Data[1]
1 [Adapter Name]:[Slot]:O.Data[2]
2 [Adapter Name]:[Slot]:O.Data[3]
3 [Adapter Name]:[Slot]:O.Data[4]
4 [Adapter Name]:[Slot]:O.Data[5]
5 [Adapter Name]:[Slot]:O.Data[6]
6 [Adapter Name]:[Slot]:O.Data[7]
7 [Adapter Name]:[Slot]:O.Data[8]