Rockwell Automation 6185-V Industrial 18.1 Inch Flat Panel Monitor User Manual - Manual (Page 59)

Industrial 18.1" Flat Panel Monitor 59
Publication 6185-UM001B-EN-P
Specifications (6185-D and 6185-N)
Display
Type
Active Matrix Color Thin Film Transistor (TFT) LCD
Backlight
Type
Life Expectancy
Field Replaceable
Cold Cathode Tubes (CCT) (8 bulbs)
50,000 hours (mean for 1/2 brightness point)
No
Nominal Display Area
Diagonal
Horizontal
Vertical
18.1 in. (460 mm)
14.1 in. (359 mm)
11.3 in. (287 mm)
Resolution 1280x1024 pixels, full color
Viewing Angle (CR ≥ 10)
Horizontal (typical)
Vertical (typical) +/-85 deg.
+/-85 deg.
Luminance (typical) 200 nit, 58 fL (screen overlay option will reduce
luminance)
Contrast Ratio (typical) 150:1
CIE coordinates - White x=0.315, y=0.329
Response Time 45 msec (typical)
Video
Supported Standards
720x400 at 70 Hz (VGA text)
640x480 at 60 Hz and 75 Hz
800x600 at 60 Hz and 75 Hz
1024x768 at 60 Hz and 75 Hz
1280x1024 at 60 Hz and 75 Hz (native)
Video Input Signal RGB analog (white level = 0.714V above ref. Black,
into 75 Ohms
Sync Input Signals H and V separate (TTL levels, positive or negative),
Composite
Input Connection Female HD-15
5-BNC connector support through cable adapter
Controls and Indicators
Front Panel
Luminance, status LEDs
Back Panel Access on-screen menu to adjust screen display
On-Screen Menu Horizontal size, vertical position, horizontal position,
contrast, brightness, clock phase, color balance
Operator Input Touchscreen Option - Resistive or capacitive
touchscreen, with serial controller and DOS and
Windows 95/98/2000 drivers. Other OS drivers are
available.
Electrical
Line Voltage
85 to 264 VAC, 18 to 32 VDC
Line Frequency 47-70 Hz or DC