Rockwell Automation 6185-V Industrial 18.1 Inch Flat Panel Monitor User Manual - Manual (Page 29)

Industrial 18.1" Flat Panel Monitor 29
Publication 6185-UM001B-EN-P
Connecting Guidelines (6185-D/6185-N only)
When connecting the RAC6185 18.1" Industrial Flat Panel Monitor, note
the following safety considerations for the rack mount and panel mount
units:
ATTENTION: EXPLOSION HAZARD! – Substitution
of components may impair suitability for Class I, Div. 2.
ATTENTION: EXPLOSION HAZARD! – Do not
disconnect equipment unless power has been switched off
or the area is known to be non-hazardous.
Connecting AC Power (AC Power Option)
The RAC6185 18.1" Flat Panel Monitor requires a single-phase power
supply providing 85-264 VAC at 47-70 Hz. Power must be available at a
grounded three-pin outlet located nearby. Whenever possible, connect
the monitor to the same AC source that supplies the computer.