Introduction, Cascaded configuration, Chapter 5 – Rockwell Automation 21G PowerFlex 750-Series AC Drives Reference Manual User Manual
Page 47: Introduction cascaded configuration, Chapter

Rockwell Automation Publication 750-RM001F-EN-P - February 2012
47
Chapter
5
General Device and Feedback Monitoring
Configuration
Introduction
This chapter describes the general and feedback configuration settings that must
be configured to operate the safe speed monitor option module.
Cascaded Configuration
The safety option may be used in single-axis or multi-axis applications. The P20
[Cascaded Config] parameter indicates the safety option’s location in the system:
Single Unit (Single), Cascaded First Unit (Multi First), Cascaded Middle Unit
(Multi Mid), or Cascaded Last Unit (Multi Last). Single unit and cascaded first
options are system masters.
for more information on cascaded configurations.
Topic
Page
This manual is related to the following products: