Minimum system requirements, Registering and activating the software – UVP Doc-It Life Science User Manual
Page 7
Introduction
2
Minimum System Requirements
Windows XP Professional with Service Pack-2 or higher (32 bit only), Vista (32 bit only), or
Windows 7 (32 bit only)
Internet Explorer 6.0 or higher [To determine the version of Internet Explorer, open Internet
Explorer and click on Help > About]
Intel Pentium Processor or equivalent, 1.6 GHz or higher
1 GB of RAM or greater (2 GB recommended)
200 MB of available hard disk space for the program, more for data
To avail the functionality of 21 CFR Part 11, the partition must be formatted with NTFS.
CD-ROM drive
Color monitor, supporting at least 1024 x 768 resolution and 16-bit or better colors; 24-bit or 32-
bit color is strongly recommended
Registering and Activating the Software
Overview
Overview
Use of LS software requires activation of a security code from UVP. Registration and activation of the
software can be accomplished by phone, email or by the Internet. Two types of licenses are available,
single-user or network-user with a five-user license. Additional licenses are available.
Registering the Software
Activate the software by entering an activation code provided by UVP in order to gain full access rights to
the software.
Once the LS software is installed, it will operate in full-future trial mode for 14 days. Within the 14-day trial
mode, the LS software must be registered with UVP. Otherwise the software will only operate in
demonstration mode after the 14-day trail period. The demonstration mode limits the software to only
open and use the demonstration images provided by UVP.
The License Wizard window will appear. There are three ways to retrieve an activation code: phone,
email or Internet and selecting one of the options from the License Wizard window.
On the Fly Activation: Choose this option to activate the software immediately through the
Internet.
Already Have an Activation ID: This option is useful when reloading (or upgrading) the software
after receiving an initial activation code.
Offline Activation: This option is used if the computer is not connected to the Internet. This
allows the user to obtain the activation code and enter it at another time