UVP Doc-It Life Science - Manual (Page 35)

Capturing Images
30
Capturing Images
This topic discusses the process of capturing images using LS software. The following sections explain
the process in more detail:
To capture an image with the camera:
If the camera plug-in is not showing in the software interface, select View > Plugins and load the
camera plug-in for the camera.
Place the gel (object to be captured) into the darkroom
Turn the camera to A-DEP.
Select Preview in the camera plug-in.
If the settings are not correct, change the camera dial to M to manually control the settings of the
camera.
When the optimal settings have been found, click onto Capture. .