SATEC PM174 Manual - Manual (Page 111)

Chapter 4 PAS
Application Software Monitoring Devices
Series PM174 Powermeters 111
Monitoring Devices
Viewing Real-time Data
For information on the real-time data monitoring and recording
options, see the “PAS Getting Started Guide”.
To get real-time data from your device, select the device site
from the list box on the PAS toolbar, point to RT Data Monitor
on the Monitor menu, and then select a data set you want to
view.
Real-time data can be continuously retrieved from your
devices, updated on the screen at the rate you defined in the
Instrument Setup, and be recorded to a file. You can view
acquired data in a tabular or in a graphical form as a data
trend.
See Appendix D for a list of data available in your meter.
Viewing Min/Max Log
To retrieve the real-time Min/Max log data from your device,
select the device site from the list box on the toolbar, point to
RT Min/Max Log on the Monitor menu, and then select a data
set you want to view.
For more information on the Min/Max data monitoring options,
see the “PAS Getting Started Guide”.