12 error messages, 1 short overview of the ethercat error messages, Error messages – Lenze E94AYCET User Manual
Page 90
12
Error messages
12.1
Short overview of the EtherCAT error messages
90
Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 9.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12
Error messages
This chapter supplements the error list in the reference manual and the »Engineer« online help for
the Servo Drive 9400 by the error messages of the E94AYCET (EtherCAT) communication module.
12.1
Short overview of the EtherCAT error messages
The following table lists all EtherCAT error messages in numerical order of the error number.
Furthermore the preset error response and – if available – the parameters for setting the error
response are specified.
Tip!
When you click the cross-reference in the first column, you will see a detailed description
(causes and remedies) of this error message.
Reference manual/online help for the Servo Drive 9400
Here you can find general information on diagnostics & fault analysis and on error
messages.
Error number
Designation
Response (Lenze setting)
Adjustable in
hex
dec
13119744
EtherCAT: Connection to 9400 lost
No response
-
13127956
EtherCAT: Internal supply voltage too low
Information
-
13129009
EtherCAT: Memory: No access
Information
-
13129010
EtherCAT: Memory: Error while reading
Information
-
13129011
EtherCAT: Memory: Error while writing
Information
-
13131792
EtherCAT: Restart after watchdog reset
Error
-
13131793
EtherCAT: Internal error
Error
-
13132032
EtherCAT: Internal error
Information
-
13132033
EtherCAT: Internal error
Error
-
13132048
EtherCAT: Internal mapping error
Warning locked
-
13132831
EtherCAT: Parameter set invalid
Error
-
13132832
EtherCAT: Error: Lenze setting loaded
Error
-
13140273
EtherCAT: Quit the 'Operational' status
No response
/
13140274
EtherCAT: Sync loss detected in standard device
Warning locked
-