Lenze E94AYCET - Manual (Page 121)

Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 9.0 EN · 02/2014 · TD17
121
13 Parameter reference
13.3 Parameters of the communication module for slot MXI2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14534
C14535
Parameter | Name:
C14534 | Mapping entries TPDO-4
Data type: UNSIGNED_64
Index: 10041 = 0x2739
This code is used device-internally and must not be written by the user!
Subcodes 1 ... 32 specify the mapping for the TPDO channel 4.
• Servo Drives 9400 exclusively support mapping objects with a data length of 8 bits (1 byte) or a multiple of this
value. Incompatible objects must be mapped to variables with a compatible data length.
• The master must have the same mapping entries as the slave.
 Structure of the mapping codes ( 64)
Value is bit-coded: Info
Bit 0 Bit 0
... ...
Bit 63 Bit 63
Subcodes Lenze setting Info
C14534/1 0 1. Mapping entry TPDO-4 (I-1A03.01)
... ... ...
C14534/32 0 32. Mapping entry TPDO-4 (I-1A03.20)
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14535 | Mapping entries TPDO-5
Data type: UNSIGNED_64
Index: 10040 = 0x2738
This code is used device-internally and must not be written by the user!
Subcodes 1 ... 32 specify the mapping for the TPDO channel 5.
• Servo Drives 9400 exclusively support mapping objects with a data length of 8 bits (1 byte) or a multiple of this
value. Incompatible objects must be mapped to variables with a compatible data length.
• The master must have the same mapping entries as the slave.
 Structure of the mapping codes ( 64)
Value is bit-coded: Info
Bit 0 Bit 0
... ...
Bit 63 Bit 63
Subcodes Lenze setting Info
C14535/1 0 1. Mapping entry TPDO-5 (I-1A04.01)
... ... ...
C14535/32 0 32. Mapping entry TPDO-5 (I-1A04.20)
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT