beautypg.com

Safety instructions, 1 general safety information, 2safety instructions – Lenze 8400 BaseLine Manual User Manual

Page 9

background image

Safety instructions

General safety information

2

9

EDS84ABD302 EN 4.0

2

Safety instructions

2.1

General safety information

For your personal safety
Disregarding the following safety measures can lead to severe injury to persons and

damage to material:

ƒ

Only use the product as directed.

ƒ

Never commission the product in the event of visible damage.

ƒ

Never commission the product before assembly has been completed.

ƒ

Do not carry out any technical changes on the product.

ƒ

Only use the accessories approved for the product.

ƒ

Only use original spare parts from Lenze.

ƒ

Observe all regulations for the prevention of accidents, directives and laws

applicable on site.

ƒ

Transport, installation, commissioning and maintenance work must only be carried

out by qualified personnel.
– Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or

DIN VDE 0110 and all national regulations for the prevention of accidents.

– According to this basic safety information, qualified, skilled personnel are persons

who are familiar with the assembly, installation, commissioning, and operation of

the product and who have the qualifications necessary for their occupation.

ƒ

Observe all specifications in this documentation.
– This is the condition for safe and trouble-free operation and the achievement of

the specified product features.

– The procedural notes and circuit details described in this documentation are only

proposals. It’s up to the user to check whether they can be transferred to the

particular applications. AC Technology Corporation does not accept any liability for

the suitability of the procedures and circuit proposals described.

ƒ

Depending on their degree of protection, some parts of the Lenze controllers

(frequency inverters, servo inverters, DC speed controllers) and their accessory

components can be live, moving and rotating during operation. Surfaces can be hot.
– Non-authorised removal of the required cover, inappropriate use, incorrect

installation or operation, creates the risk of severe injury to persons or damage to

material assets.

– For more information, please see the documentation.

ƒ

High amounts of energy are produced in the controller. Therefore it is required to

wear personal protective equipment (body protection, headgear, eye protection, ear

protection, hand guard).