Lenze 8400 BaseLine Manual - Manual (Page 6)

About this documentation
Document history
1

6 EDS84ABD302 EN 4.0
1 About this documentation
Contents
This Hardware Manual informs you how to use the BaseLine C and BaseLine D version of
the 8400 controller series as directed.
Validity
The information in this Hardware Manual applies to the 8400 BaseLine C and BaseLine D
inverters with the following nameplate data:
Type Type designation From hardware version From software version
8400 BaseLine C E84AVBCxxxxxxX0 VA 03.00
8400 BaseLine D E84AVBDxxxxxxX0 VA 03.00
8400 BaseLine D with
digital output ”DO1”
E84AVBDxxxxxxX1 1A 02.01
8400 BaseLine D without
digital output ”DO1”
E84AVBDxxxxxxX0 1A 01.00
Target group
This Hardware Manual is intended for all persons who design, install, commission, and
adjust controllers of the 8400 Inverter Drives product range.

Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the ”Services & Downloads” area under
http://www.Lenze.com
1.1 Document history
Material number Version Description
13251886 1.1 06/2008 TD03 First edition
13260428 2.0 07/2008 TD03 Complete revision
13277182 3.0 02/2009 TD03 New edition due to company reorganisation
Corrections in Chapter ”Technical Data” and
”Electrical Installation”
.>3ö 4.0 03/2009 TD03 Corrections in Chapter ”Mechanical Installation”