Insert a pointq, Change the content of a step, Insert a pointq change the content of a step – ETC SmartFade ML v3.0.1 User Manual

Page 79

Edit

Insert a PointQ

Step 1:

Press EDIT

Step 2:

Select Stack by pressing STACK.

Step 3:

Select Step (wheel 1) and Insert PointQ (wheel 3). The new PointQ step will be

inserted after the selected step.

Press (MENU) to confirm.

Step 4:

Use wheel 2 to select which PointQ (0.1-0.9), and then press any bump in any

fader page and fader mode.

The PointQ is stored as soon as the bump button is pressed.

Step 5:

Press EDIT to complete, or continue with Actions from Step 2.

Change the Content of a Step

Use this function to change the memory or channel content of a step to another content.

Step 1:

Press EDIT

Step 2:

Select Sequence by pressing a bump button, or press STACK.

Step 3:

Select Step (wheel 1) and Insert (wheel 3). The content of the selected step will

be changed for a new content.

Press (MENU) to confirm.

Step 4:

Press any bump in any fader page and fader mode.

The change is stored as soon as the bump button is pressed.

Step 5:

Press EDIT to exit, or continue with Actions from Step 2. You can press UNDO

to skip and revert to the data previous to this action.