Record the stack from bumps – ETC SmartFade ML v3.0.1 User Manual

Page 69

Program

Record the Stack from Bumps

This function allows you to create the Stack with referenced memories or intensity

channels. The steps are created as each bump button for a memory or intensity is pressed.

Action

Console

Feedback

1. Activate record

sequence

All buttons that can record in this mode will

blink at full in yellow (press CLEAR to exit).

2. Choose Stack

The moment the STACK button is pressed,

the button will light up in full. Now all bump

buttons can be stored as steps, and blink at

full in each fader mode.

3. If desired, set the times

for this step

Wheels 1 & 2

4. If desired, set Move Dark

mode

If off (unlit) all devices will move when GO is

pressed for this step. If on (lit) all devices will

preposition when this step is loaded to the

Next fader.

5. Select a source for this

step

...

You can select any memory or intensity

channel. Change fader page if desired.

When a bump button is pressed, that memory

or intensity will be stored as a reference to

this step.

Repeat steps 3-4 until satisfied.

6. End recording

End recording. The console will return to the

fader mode prior to recording this sequence.

Press UNDO to skip the recording.

REC
SEQ

STACK

MOVE

DARK

REC
SEQ