Despatch P1400+ Temperature Controller - Manual (Page 48)

42
Parameter Lower
Display
Upper Display
Adjustment Range
Default
Value
When
Visible
Setpoint Value SP Within scale range upper
and lower limits Range
minimum Always
Local Setpoint Value LSP
_LSP
or
*LSP
Within scale range upper
and lower limits.
____
or * before the legend
indicates if this is the
currently active SP
Range
minimum. OpnA or
Opnb = rSPi
Setpoint 1 Value SP1
_SP1
or
* SP1
Within scale range upper
and lower limits.
____
or * before the legend
indicates if this is the
currently active SP
Range
minimum. diGi or
diG2 = diS1
Setpoint2 Value SP2
_SP2
or
* SP2
Within scale range upper
and lower limits.
____
or * before the legend
indicates if this is the
currently active SP
Range
minimum. diGi or
diG2 = diS1
Set-up Lock Code SLoc 0 to 9999 10 10 10 10 Always
**First Operator mode displays follows.
Note:
Alarm parameters marked * are repeated in Configuration Mode.
Note:
**Once the complete list of Set Up Mode parameters has been displayed, the first Operator
Mode display is shown without exiting from Set Up Mode. Display seen is dependant on the
Display Strategy and status of Auto/Manual mode selection.