Despatch P1400+ Temperature Controller - Manual (Page 37)

31
7.4 Lock Code View
In the event that a lock code is forgotten, the instrument lock code values can be seen in the lock
code view. In this view the codes are read only, the codes can be changed from the mode to which
they apply.
Entry and Navigating in Lock Code View Mode
Press and together while the instrument is powering up until the CLoc display is
shown.
Once in this mode
Press to step between lock codes.
Note:
If there is no key activity for 2 minutes the instrument returns to Operator Mode. To forcefully exit
this view, switch off the instrument.
Table 9. Lock Code View Menu
Lock Code
Name Description Upper/Main
Display
Lower Display
Configuration
Lock Code Read only view of
Configuration Lock Code. Current Value CLoc
Setup Lock
Code Read only view of Setup
Mode Lock Code. Current Value SLoc
Automatic
Tune Lock
Code Read only view of
Automatic Tune Lock
Code. Current Value tLoc
*Note:
On Indicators (which have a single line display), this legend is shown for approx 1 second before
the Main display value.