5 replacing the instrument in its housing – Despatch P1400+ Temperature Controller User Manual
Page 15
9
3.5 Replacing the Instrument in its Housing
With the required option modules correctly located into their respective positions the instrument can
be replaced into its housing as follows:
1. If required, move the
CPU
and PSU boards back together, taking care to locate the option
module tongues into the slots in the board opposite. Hold the main boards together while
relocating them back into the mounting struts on the front panel.
2. Align the
CPU
and PSU PCBs with their guides and connectors in the housing.
3.
Slowly and firmly, push the instrument in position.
CAUTION:
Ensure that the instrument is correctly orientated. A mechanical stop will operate if an
attempt is made to insert the instrument in the wrong orientation, this stop MUST NOT
be over-ridden.