Despatch P1400+ Temperature Controller - Manual (Page 39)

33
Changing Parameter Values
Press to navigate to the required parameter, then press or to set the value as
required.
Once the value is changed, the display will flash to indicate that confirmation of the change is
required. The value will revert back if not confirmed within 10 seconds.
Press to accept the change.
Or
Press to reject the change and to move onto the next parameter.
Hold down and press to return to Select Mode.
Note:
If there is no key activity for 2 minutes the instrument returns to the operator mode.
Table 10. 1400+ Configuration Mode Parameters
Parameter Lower
Display Upper
Display Description Default
Value
When
Visible
bC B type: 100 to 1824 ºC
bF B type: 211 to 3315 ºF
CC C type: 0 to 2320 ºC
CF C type: 32 to 4208 ºF
JC J type: -200 to 1200 ºC
JF J type: -328 to 2192 ºF
J
.
C
J type: -128.8 to 537.7 ºC
with decimal point
J
.
F
J type: -199.9 to 999.9 ºF
with decimal point
K C K type: -240 to 1373 ºC
K F K type: -400 to 2503 ºF
k
.
C
K type: -128.8 to 537.7 ºC
with decimal point
K
.
F
K type: -199.9 to 999.9 ºF
with decimal point
LC L type: 0 to 762 ºC
LF L type: 32 to 1403 ºF
Input type and
Range InPt
L
.
C
L type: 0.0 to 537.7 ºC
with decimal point
JC
for Europe
JF
for USA
Always