Dascom 7010 Programmers Manual ZPL - Manual (Page 68)

68
Format: ^PP or ~PP
~PS
Print Start
Description:
The ~PS command causes a printer in the Pause mode to resume printing. The operation is identical
to pressing the PAUSE button on the front panel of the printer when the printer is already in the
Pause mode.
Format: ~PS
^PQ
Print Quantity
Description:
The ^PQ command gives control over several printing operations. It controls the number of labels to
print, the number of labels printed before printer cuts, and the number of replications of each serial
number.
Format: ^PQq,p,r,o
Parameters:
q = total quantity of labels to print
Accepted Value:1 to 9,999
Default Value:1
p = Cut value
Accepted Value:1 to 9,999 labels between cuts
Default Value:0-no cut
r = replicates of each serial number
Accepted Value: 0 to 9,999
Default Value: 0 – no replicates
o = not care
^PR
Print Rate
Description: