Dascom 7010 Programmers Manual ZPL - Manual (Page 67)

67
The ~JL command is used to set the label length. Depending on size of label, the printer will feed
one or more blank labels.
Format: ~JL
~JA , ~JP , ~JX
Pause and Cancel format
Description:
The ~JA , ~JP and ~JX command clears the format currently being processed and places the printer
in the Pause mode.
Format: ~JP
^PH ~PH
Slew to Home Position
Description:
The ~PH or ^PH(Slew to Home Position)command causes the printer to feed one blank label.
･The ~PH command feeds one label after the format currently being printing is donw or when the
printer is placed in pause.
･The ^PH command feeds one blank label after the format it is in prints.
Format: ^PH or ~PH
^PP ~PP
Programmable Pause
Description:
The ~PP command stops printing after the current label is printed(if one is printing) and places the
printer in the Pause mode.
The ^PP command is not immediate. Therefore,severallables may be printed before a pause is
performed. This command will pause the printer after the current format prints.
The operation is identical to pressing the PAUSE button on the front panel of the printer. The printer
will remain paused until the PAUSE button is pressed or a ~PS command is sent to the printer.