Dascom 7010 Programmers Manual ZPL - Manual (Page 36)

36
･^B3 standard ratio is 3 : 1.
･Field data(^fd) is limited to the width(or length, if rotated)of the label.
･Code 39 automatically generates the Start and Stop Character(*)
･ Valid ASCII codes are as follows: 32, 36-37, 43, 45-47, 48-57, 65-90.
Format: ^B3o,e,h,f,g
Parameters:
o = orientation
Accepted Values:
N = normal
R = rotated 90 degrees(clockwise)
I = inverted 180 degrees
B = read from bottom up,270 degrees
Default Value: Current ^FW value
e=Mod-43 check digit
Accepted Values: Y(yes) or N(no)
Default Value: N
h = bar code height(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: Value set by ^BY
f = print interpretation line
Accepted Values: Y(yes) or N(no)
Default Value: Y
g = not care
Example:
^BA
Code 93 Bar Code
Description:
The ^BA command is a variable length, continuous symbology. It is used in many of the
same applications as Code 39. Valid ASCII codes are “: , & # @ $ % + - . /
ABCDEFGHIJKLMNOPQRST U V W X Y Z
^XA^FO100,75^BY3
^BAN,100,Y,N,N
^FDABC123^XZ