Dascom 7010 Programmers Manual ZPL - Manual (Page 24)

24
h = bitmap height(in dot rows)
w = bitmap width(in dot rows)
x = x-offset(in dots)
y = y-offset(in dots)
i = typesetting motion displacement(width including inter-character gap
of a particular character in the font)
data = hexadecimal bitmap description
~DU
Download Unbounded TrueType Font
Description:
Some international fonts have more than 256 printable characters. These fonts are supported as
“LARGE TrueType Fonts” such as Asian fonts, and are downloaded to the printer with the ~DU
command.
A ZPL® downloadable format must be converted from original True Type Fonts file.
Format: ~DUf,s,data
Parameters:
f = font name
Accepted Values: A destination indicator(any non-volatile RAM device; default device
is R:) followed by the TrueType name, up to 8 characters.
Default Value: If no name is entered, UNKNOWN is used.
s = font size
Accepted Values: The number of memory bytes required to hold the ZPL®
downloadable format of the font.
Default Value: If no data is entered, the command is ignored.
data = data string
Accepted Values: a string of ASCII hexadecimal values(2 hex digits/byte).The total
number of 2-digit values must match s.
Default Value: If no data is entered, the command is ignored.
Example:
~DUR:KANJI,896753,60CA017B0CE7…