Dascom 7010 Programmers Manual ZPL - Manual (Page 60)

60
Default Value: R:
o = object name
Accepted Values: any 1 to 8 character name
Default Value: If no name is entered, UNKNOWN is used.
x = extension
Accepted Values: any valid 3-letter extension
Default Value: .GRF
Example:
To delete the image SAMPLE1.GRF from DRAM:
^XA^IDR:SAMPLE1.GRF^XZ
~EG
Erase Download Graphics
Description:
The ~EG command is used to delete all graphic images(hexadecimal images)from DRAM. This
command will erase everything in R:, E:, and B: memory
Format: ~EG
Comments:
The ~EG command is no longer recommended for use! It is recommended that the ~ID(Object
Delete)command is used to selectively delete stored graphics.
Advanced Techniques
^FX
Comment
Description:
The ^FX command is useful when you want to add a “non-printing” informational comment or
statement within a label format. Any data after the ^FX the label format. Therefore, you should avoid
using the caret(^)or tilde(~) commands within the ^FX statement.
Format: ^FXc
Parameters:
c = non-printing comment