Dascom 7010 Programmers Manual ZPL - Manual (Page 66)

66
Default Value:current minute
f = second
Accepted Values:00 to 59
Default Value:current second
g = format
Accepted Values:
A = a.m.
P = p.m.
M = 24-hour military
Default Value:M
~JR
Power On Reset
Description:
The ~JR command resets all of the printer’s internal software,performs a power-on
self-test(POST),clears the buffer and DRAM,and resets communication parameters and default
values.~JR performs the same function as a manual power-on reset.
Format: ~JR
~JC
Label length measurement
Description:
The ~JC command is used to force a label length measurement.
Format: ~JC
Comments:
In continuous mode, this command does not operate..
~JL
Set Label Length
Description: