Dascom 7010 Programmers Manual ZPL - Manual (Page 18)

18
It depends on the font at that time for the character printed by the actual code page.
Format:^CIa,s1,d1,s2,d2,…
Parameters:
a = desired character set
Accepted Values:
0=U.S.A.
1=Reserved (U.S.A.)
2=UK
3= Reserved
4=Denmark/Norway
5=Sweden/Finland
6=Germany
7=France
8= Reserved (France)
9=Italy
10=Spain
11=Reserved (U.S.A.)
12=Reserved (U.S.A.)
13=IBM Code Page 850
Initial Value at Power-up: last permanent value saved.
s1=source 1(character position to be remapped)
Accepted Values: decimals 0 to 255
d1=destination 1(new position for the character referred to in s1)
Accepted Values: decimals 0 to 255
s2=source 2(character position to be remapped)
Accepted Values: decimals 0 to 255
d2=destination 2(new position for the character referred to in s2)
Accepted Values: decimals 0 to 255
… = continuation of pattern
Up to 256 source and destination pairs can be entered in this command.
Example:
This example re-maps the Euro symbol(21) to the Dollar sign value(36).In this way, when the dollar
sign character is sent to the printer, the Euro symbol will print. The Euro symbol value,15 Hex,
equals 21 decimal, and the Dollar sign value,24 Hex, equals 36 decimal.