Dascom 7010 Programmers Manual ZPL - Manual (Page 61)

61
^FR
Field Reverse Print
Description:
The ^FR command allows a field to appear as white over black or black over white. When printing a
field and the ^FR command has been used, the color of the output is the reverse of its background.
Format: ^FR
Parameters:
^FR = field reverse print
Comments:
The ^FR command applies to only one field and has to be specified each time. When multiple ^FR
commands are going to be used, it may be more convenient to use the ^LR command.
^LR
Label Reverse Print
Description:
The ^LR command reverses the printing of all fields in the label format. It allows a field to appear as
white over black or black over white.
Using the ^LR is identical to placing a ^FR in all current and subsequent fields.
Format: ^LRa
Parameters:
a = reverse print all fields
Accepted Values: Y(yes) or N(no)
Initial Value Power-up: N or last permanently saved value
Comments:
The ^LR setting will remain active unless turned off by ^LRN command or the printer is powered
down.
Only fields that come after this command will be affected.
^PM