Dascom 7010 Programmers Manual ZPL - Manual (Page 58)

58
Default Value: .GRF
p = print image after storing
Accepted Values: Y(yes) or N(no)
Default Value: Y
Example:
The following is an example of using the ^IS command to save a label format to DRAM. The name
used to store the graphic is SAMPLE2.GRF
^XA
^LH10,15^FWN^BY3,3,85^CFD,36
^GB430,750,4^FS
^FO10,170^GB200,144,2^FS
^FO10,318^GB410,174,2^FS
^FO212,170^GB206,144,2^FS
^FO10,498^GB200,120,2^FSR^FO212,498^GB209,120,2^FS
^FO135,20^A0,70,60^FDZEBRA^FS
^FO80,100^A0,40,30^FDTECHNOLOGIES CORP^FS
^CFD,18,10^FS^FO15,180^FDARTICLE#^FS
^FO218,180^FDLOCATION^FS^FO15,328^FDDESCRIPTION^FS
^FO15,508^FDREQ.NO.^FS
^FO220,508^FDWORK NUMBER^FS
^FO15,630^AD,36,20^FDCOMMENTS:^FS
^ISR:SAMPLE2.GRF,Y
^XZ
^IL
Image Load
Description:
The ^IL command is used at the beginning of a label format to load a stored a format and merge it
with additional data. The image is always positioned at ^FO0,0.
Format: ^ILd:o,x
Parameters:
d = device location of stored object
Accepted Valkues:E:,B:,R: