Dascom 7010 Programmers Manual ZPL - Manual (Page 26)

26
Bar Codes
^B2
Interleaved 2 of 5 Bar Code
Description:
The ^B2 command is a high density, self-checking, continuous, numeric symbology.
Each data character for the Interleaved 2 of 5 Bar Code is composed of five elements: five bars or
five spaces. Of the five elements, two are wide and three are narrow. The bar code is formed by
interleaving characters formed with all spaces into characters formed with all bard.
･^B2 standard ratio(ratio of thick bar to thin bar) is 5 : 2.
･Field data(^FD) is limited to the width(or length, if rotated)of the label.
Format: ^B2o,h,f,g,e
Parameters:
o = orientation
Accepted Values:
N = normal
R = rotated 90 degrees(clockwise)
I = inverted 180 degrees
B = read from bottom up,270 degrees
Default Value: Current ^FW value
h = bar code height(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: Value set by ^BY
f = print interpretation line
Accepted Values: Y(yes) or N(no)
Default Value: Y
g = not care
e = calculate and print Mod 10 check digit
Accepted Values: Y(yes) or N(no)
Default Value: N
Example:
^XA^FO100,100^BY3
^B2N,150,Y,N,N
^FD1234567890^XZ