Dascom 7010 Programmers Manual ZPL - Manual (Page 38)

38
Code 128 has three subsets of characters. There are 106 encoded printing characters in each set, and
each character can have up to three different meanings, depending on the character subset being used.
Each Code 128 character consists of six elements: three bars and three spaces.
･Field data(^FD) is limited to the width(or length, if rotated)of the label.
Format: ^BCo,h,f,g,e,m
Parameters:
o = orientation
Accepted Values:
N = normal
R = rotated 90 degrees(clockwise)
I = inverted 180 degrees
B = read from bottom up,270 degrees
Default Value: Current ^FW value
h = bar code height(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: Value set by ^BY
f = print interpretation line
Accepted Values: Y(yes) or N(no)
Default Value: Y
The interpretation line can be printed in any font by placing the font command before
the bar code command.
g = not care
e = not care
m = mode
Accepted Values:
N-no selected mode
U-UCC Case Mode
Default Value: N