Dascom 7010 Programmers Manual ZPL - Manual (Page 52)

52
^GD
Graphic Diagonal Line
Description:
The ^GD command produces a straight diagonal line connecting one corner with the opposite corner
of a box closing this line.
Format: ^GBw,h,t,c,r
Parameters:
w = box width(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: value of t(thickness) or 1
h = box height(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: value of t(thickness) or 1
t = not care
c = not care
o = orientation – direction of the diagonal
Accepted Values:
R(or /)=right-leaning diagonal
L(or ¥)=left-learning diagonal
Default Value: R
Example:
^XA
^FO150,100^GB350,203,10^FS
^FO155,110^GD330,183,10,,,^FS
~DG
Download Graphics
Description:
The ~DG(Download Graphic)command performs the following functions:
1.Puts the printer into graphics mode.