Dascom 7010 Programmers Manual ZPL - Manual (Page 33)

33
B = read from bottom up,270 degrees
Default Value: Current ^FW value
h = bar code height(in dots)
Accepted Values: 1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value: Value set by ^BY
f = print interpretation line
Accepted Values: Y(yes) or N(no)
Default Value: Y
g = not care
e = not care
Example:
^BS
UPC/EAN Extensions
Description:
The ^BS(UPC/EAN extensions)command is the 2-and 5-digit add-on used primarily by publishers to
create bar codes for ISBN’s(International Standard Book Numbers).These extensions are handled as
separate bar codes.
The ^BS command is designed to be used with ^BU(UPC-A Bar Code)and ^B9(UPC-E Bar Code)
･Field data(^FD) is limited to exactly 2 or 5 characters.
･ When the 3 or 6 characters is sent from the computer, the printer compares the characters with
the calculated checksum. If they do not agree, the printer prints all bar codes 0 (zero). And it is
not printed when the input characters is smaller than 2 or 5 characters.
Format:^BSo,h,f,g
Parameters:
o = orientation
Accepted Values:
^XA^FO150,100^BY3
^BEN,100,Y,N
^FD098723497823^XZ