Dascom 7010 Programmers Manual ZPL - Manual (Page 34)

34
N = normal
R = rotated 90 degrees(clockwise)
I = inverted 180 degrees
B = read from bottom up,270 degrees
Default Value: Current ^FW value
h = bar code height(in dots)
Accepted Values:1 to 7999(200dpi) / 1 to 11998(300dpi)
Default Value set by ^BY
f = print interpretation line
Accepted Values: Y(yes) or N(no)
Default Value: Y
g = not care
Example:
^BU
UPC-A Bar Code
Description:
The ^BU command is a fixed length, numeric symbology. It is Primarily used in the retail industry
for labeling packages. The UPC-A bar code has 11 data characters.
･^BI Element size is 1 : 1, 2 : 2, 3 : 3, 4 : 4, 6 : 6, and 8 : 8.
･Field data(^FD) is limited to exactly 11 characters.
･When the 11 characters is sent from computer, th e printer automatically calculates the checksum
at the end of digit
･ When the 12 characters is sent from the computer, the printer compares the characters with the
calculated checksum. If they do not agree, the printer prints all bar codes 0 (zero). And it is not
^XA^FO150,100^BY3
^BSN,100,Y,N
^FD12^XZ
^XA^FO150,100^BY3
^BSN,100,Y,N
^FD12345^XZ