Dakota Ultrasonics MINI--MAX User Manual
Page 73
MINI-MAX Ultrasonic Bolt Tension Monitor
67
5) Use the CLR key to backspace if necessary.
6) Repeat steps 3 - 5 until the Group Note is completed.
7) Press the OK key to save the Group Note and return to the Group List
Items menu, or ESC to cancel entering the Group Note.
Selecting the Number of Bolts in the Group
Note: A group can contain up to 250 bolts. In this case, the number of
bolts in the group can be thought of as the number of reference points on
the calibration standards. If the 3” & 6” cal bars are being used, then the
group should contain 2 bolts. If the triple sided glass block is being used,
then the group should contain 3 bolts.
1) Use the UP and DOWN arrow keys to scroll through the new Group
List Items until NUM BOLTS is highlighted.
2) Press the ENTER key to display the Digits Edit Box.
3) Press the UP and DOWN arrow keys to scroll the highlighted value.
4) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
5) Repeat steps 3 & 4 until the NUM BOLTS value is correctly displayed.