Dakota Ultrasonics MINI--MAX - Manual (Page 171)

MINI-MAX Ultrasonic Bolt Tension Monitor
165
Saving the Group
Once all the parameters are set, the user has the option of saving or
canceling the new group.
1) Use the UP and DOWN arrow keys to scroll through the new Group
List Items until CREATE NEW GROUP? is highlighted.
2) Press the ENTER key to accept the group parameters, and activate the
confirmation screen.
3) Press the OK key to save the New Group, or the ESC key to cancel the
New Group setup and return to the DATA menu.
4) Press the MEAS key to return to the measurement screen to begin
measuring reference lengths.
14.3 Storing a reading
Now that a grid has been created, it’s time to make some measurements and
store the readings. The following procedures outline this process: