Dakota Ultrasonics MINI--MAX - Manual (Page 168)

Dakota Ultrasonics
162
If there’s not enough memory available to create the group, an error
message box “NOT ENOUGH MEMORY“ will be displayed. Press the OK
or ESC key to return to the Group List Items menu. It may be necessary
to free some memory in the MINI-MAX at this time.
Selecting the Starting Bolt Number
Note: Depending on the application and layout of the project, the user
won’t always want the starting bolt to be 1. This feature allows the user to
define what the starting number will be.
1) Use the UP and DOWN arrow keys to scroll through the new Group
List Items until START BOLT NUM is highlighted.
2) Press the ENTER key to display the Digits Edit Box.
3) Press the UP and DOWN arrow keys to scroll the highlighted value.
4) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
5) Repeat steps 3 & 4 until the START BOLT NUM value is correctly
displayed.