Dakota Ultrasonics MINI--MAX User Manual
Page 158
Dakota Ultrasonics
152
3)
Use the LEFT and RIGHT arrow keys to toggle the ALARM STATUS
on/off.
4)
Continue on to the next section “Setting the Alarm Lo Limit”.
Setting the Alarm LO Limit
1) Assuming the ALARM STATUS is ON, use the UP and DOWN arrow
keys to scroll through the sub menu items until ALARM LO LIMIT is
highlighted.
2) Press the LEFT and RIGHT arrow keys to scroll the value. When the
correct alarm value is being displayed, proceed to step 7.
3) Alternatively, press the ENTER key to display the Digits Edit Box.
4) Press the UP and DOWN arrow keys to scroll the highlighted value.
5) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
6)
Repeat steps 4 & 5 until the ALARM LO value is correctly displayed.
7)
If only one limit will be used, press the MEAS key to return to the
measurement screen and begin taking readings. Otherwise, continue
on to set the ALARM HI LIMIT.